The Xiaomi Mi Flash Tool is software that you can use to flash stock firmware onto your device. The program is available in many different versions and supports a variety of devices. Read on to find out what each version supports and how to install it. Once you have downloaded the program, you can start the process of flashing your device with the latest version. This can take a few minutes and will give you the stock firmware that you need to continue using your device.
Table of contents
Mi Flash Tool Supported Devices
The MiFlash Tool is a free download available for Windows and is supported on Qualcomm chipset-powered devices. It can be used to flash the fastboot firmware in Xiaomi Mi 3 and other models. This tool requires that the device has been unlocked from the bootloader and that the fastboot files are unlocked. It also requires that the device has a high battery percentage and be able to enter fastboot mode.
The Mi Flash Tool is compatible with a variety of Xiaomi-powered smartphones, including the Mi Note, Mi Max, Redmi 3S, Redmi Note 3, and the Mi Max 2. It also works with the Redmi 4 and Mi 4C. The Mi 5S and Mi 5X are also supported, as are the Mi6 and Mi 7 models. You will need a Windows PC to use the tool.
Compatible with Qualcomm Chipset
A good tool for installing stock firmware on Qualcomm-based devices is QFIL. QFIL can detect connected devices and flash the correct firmware. It is compatible with most Qualcomm Chipset-based devices. To use the tool, you must have a Qualcomm Driver installed on your computer. Once you’ve installed the driver, simply connect the device to QFIL. After that, you should select the firmware based on the mbn or elf file.
Other phones that are expected to use the new chips include the Xiaomi 12 series, the Realme GT 2 Pro, the Moto Edge X30, and the next iQoo flagship. OnePlus’s Find X4 Pro is also expected to be equipped with this new chipset. Asus’ ROG Phone 6 is also expected to use the Snapdragon 845 chip. Qualcomm is also developing new chipsets for Windows.
Also Check: Mi Flash Pro
Flash Tool Versions
Before you get started with the flashing process, make sure that your phone is compatible with the latest version of the Xiaomi Mi Flash Tool. Earlier versions of the tool were not compatible with the latest version of Android devices. So, make sure that your phone’s USB port and eMMC hardware is fully functional. Download the latest version of the tool from the download segment to get it running on your device. Also, make sure that your phone is not bricked before you begin the flashing process.
Before you proceed, make sure that your Xiaomi device is properly connected to your PC through a USB cable. You can use the Xiaomi Mi Flash Tool to choose which files to flash. After choosing which files you wish to flash, the tool will check that it is connected to your PC and display a successful message. After this, reboot your phone. If everything goes well, the program will display a success message. Afterward, the flashing process will be complete and you will be prompted to enter your PIN code to unlock your phone.
Flash Tool Installation
To install the MiFlash tool on a Xiaomi device, you must have administrator privileges on the computer. You must have a USB cable to connect your Xiaomi device to your PC. The flashing process will begin and it will ask you if you want to install a USB driver from Qualcomm. Once you do, select yes to continue and follow the instructions. The tool will then prompt you to install a Qualcomm QDLoader driver or a Xiaomi USB driver.
After installing the tool, you should start the phone by pressing the power button on the device. You can now proceed to the next step. The Mi PC Suite will then open. If you want to customize the phone’s settings, you can choose the options on the tool and change the settings. Once you’ve done this, the Mi PC suite will launch. It will then show you a success message, and the phone will reboot automatically.
Download Xiaomi Mi Flash Tool (All Versions)
|MiFlash20220507.zip||98 MB||Download Mi Flash Tool|